Language; Date / Time; Date / Time Setting(S) - Speco DVR-4TN User Manual

5.1.2

Language

The Language item allows the user to select the language for the OSD menu
and screen messages. Language selection takes effect immediately when the
selection is done. Press UP / DOWN to select from languages listed and
press ENTER to confirm.
5.1.3

Date / Time

The user can set the current date, time and other OSD parameters in this
menu. The Administrator's privileges are required for entering the submenu.
In the System Setup menu, select <Date/Time> and press ENTER; the
Date/Time menu displays as follows.
1. Date
2. Time
3. Time Zone
4. Date/Time Display
5. Date Display Mode
6. Time Display Mode
7. Date/Time Order
8. Daylight Saving Time Setup
9. Network Time Protocol Setup
5.1.3.1

Date / Time Setting(s)

Select <Date> or <Time> and press ENTER to adjust the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP / DOWN are used to change the value in the selected
field.
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
NOTE: The reset date/ time setting applies only to future recorded
video, the date and time of previously recorded video will not be
changed.
NOTE: After the Date/Time setting is changed, clearing the database is
recommended for avoiding record database corruption.
Date/Time
User's Manual
2005/02/21
10:39:26
OFF
1 Row
Y/M/D
24 HR
Date First
55