Input Setup - Speco DVR-4TN User Manual

You can select from below options:
<OFF>: The function is disabled.
<Specific>: That the value of transaction meets a specific value will be
<Greater Equal Than>: That the value of transaction is greater then or equal
<Less Equal Than>: That the value of transaction is less than or equal to
<Inside The Range>: That the price of transaction is within certain range will
<Outside the Range>: That the price of transaction is outside certain range,
NOTE: Only transactions (1) after "Exception Strings" and "By Numerals" are
set and (2) after "Trigger" is <ON> will be marked as exceptions in text
database. The data stored before won't be marked as exceptions.
5.10.4

Input Setup

This item is used to choose the connection method that is between your Text
Device and DVR, and setup some relative settings of the connection method.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Text Parity
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
marked as an exception. That specific value need to be
configured through the following sub-setting <Value>,
to certain value will be marked as an exception. That
specific value need to be configured through the
following sub-setting <Value>,
certain value will be marked as an exception. That
specific value need to be configured through the
following sub-setting <Value>.
be marked as an exception. The range need to be
configured through the following sub-settings <Value>
and <Value (Upper Limit)>.
will be marked as an exception. The range need to be
configured
<Value> and <Value (Upper Limit)>.
Input Setup
Port Selection
Input Source
Camera Selection
Text Filter
Manual Filter Setup
Input Process
Text Baud Rate
Text Bits
Text Stop
through the following
Serial Port
Direct Connected
ASCII
Canonical
9600
None
User's Manual
sub-settings
1
8
1
109