Video Standard; Language; Advanced Setup - Speco DVRM42 User Manual

At the CLOCK menu, move the cursor to the TIME ADJUST using the
Press the ENTER button when the cursor is on the TIME ADJUST.
Select "ON" or "OFF" using the
INTERNET TIME ADJUST is "ON", the time of DVR will be adjusted to the time offered by an NTP
server.
Move the cursor using the
buttons .
Set the correct TIME ZONE standard to your GMT.
Move the cursor to the DAYLIGHT SAVING TIME using the
using the button
If the DAYLIGHT SAVING TIME set "ON", set up the starting date and time and ending date and time. Use
▲,▼
the buttons to move the cursor and use the (-), (+) buttons to change the value.
To exit this TIME ADJUST menu, press the ESC button.
Manual setup This DVR can recognize the correct time by itself. That is to say, if you input the correct time 3 or 4 times,
:

4.5.2 VIDEO STANDARD

the DVR will recognize the clock error and display the correct time by itself.
When you power on, you can see the TIME TRIMMING VALUE screen and modify time correctly on this
screen with AUTO button and ALARM RESET button.
5.5.3 VIDEO STANDARD
4.5.3 Video Standard
At the SYSTEM menu, move the cursor to the VIDEO STANDARD using the
You can select either NTSC or PAL using the
Press the ESC button to exit from VIDEO STANDARD menu.
If you select "AUTO", this DVR can detect NTSC/PAL automatically.
4.5.4

Language

At the SYSTEM menu, move the cursor to the LANGUAGE using the
Select the desired language using the
4.5.5

Advanced Setup

At the SYSTEM SETUP menu, move the cursor to the ADVANCED SETUP using the
Press the ENTER button when the cursor is on the ADVANCED SETUP and the following screen appears.
buttons when the cursor is on "INTERNET TIME ADJUST". If the
▲,▼
buttons and then set the IP address of SELECT TIME SERVER using the
buttons.
▲,▼
buttons. Select "ON" or "OFF"
button.
▲,▼
29
buttons.
▲,▼
buttons.
buttons.
▲,▼
buttons.