Table of Contents
Advertisement
M
ACINTOSH TROUBLESHOOTING
O
PERATION CHECKLIST
For proper card operation, verify the following:
The LED on the card is lit. If the LED is not lit at all, it may not be
securely seated in its PCMCIA slot. The card's LED is lit solid
when the card has link, and blinks when searching for a network.
The Farallon driver is installed.
The Farallon Wireless card icon appears on the desktop when the
card and driver are installed.
The Farallon Wireless card is selected in the AppleTalk and TCP/IP
Control Panels of the Macintosh and that AppleTalk is active.
All devices on the wireless network, including any access points,
are set to the same configuration settings. Check the Wireless
Control Panel for configuration settings and network information.
Clicking the Save Changes button will reset the connection.
Read the Installation chapter of this manual for card configuration
instructions.
Make sure that all Ad Hoc networks are started when computers
are within range of each other.
Operation and Troubleshooting
27
Advertisement
Table of Contents
Troubleshooting
