Table of Contents
Advertisement
Installation
13
AirPort's password into the first panel. The software will automatically
transform your password into a numerical key code.
If you are connecting to another brand of access point that uses WEP,
you can manually enter as many as four keys (provided by your
network manager) and switch between them as desired. Keys must be
hexadecimal digits (meaning they are limited to combinations of the
numbers 0-9 and letters A-F).
Refer to the documentation that came with your access point for more
information about WEP implementation.
S
TATUS WINDOW
The Status text string at the top of the configuration window shows
the name of the active access point and channel. If the card is
configured for an Infrastructure network, the Signal Strength meter
will appear, indicating the strength of the card's connection to the
access point.
After you have configured the Wireless Control Panel, configure the
AppleTalk and TCP/IP Control panels of your Macintosh (see
instructions on the next page).
Advertisement
Table of Contents
Troubleshooting
