Dell U2713HM User Manual page 41

Reset Color Settings Reset your monitor color settings to the factory settings.
Display Settings Use the Display Settings to adjust image.
Aspect Ratio Adjust the image ratio as wide 16:9, 4:3 or 5:4.
Horizontal Position
Use the
Vertical Position
Use the
NOTE:
Sharpness
This feature can make the image look sharper or softer. Use
Pixel Clock The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine),
again.
NOTE:
Dynamic Contrast Dynamic Contrast adjusts the contrast ratio to 2,000,000 : 1.
Push the
or to adjust image left or right. Minimum is '0' (-). Maximum is '100' (+).
or to adjust image up or down. Minimum is '0' (-). Maximum is '100' (+).
Horizontal Position and Vertical Position Adjustments are only available for "VGA" input.
or to adjust for best image quality.
Pixel Clock and Phase Adjustments are only available for "VGA" input.
button to select the Dynamic Contrast "On" or "Off" .
or to adjust the sharpness from '0' to '100'.