Dell U2713HM User Manual page 15

Non-operating
Altitude
Operating
Non-operating
Thermal dissipation
Power Management Modess
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to
as Power Save Mode*. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the
power consumption and signaling of this automatic power saving feature:
VESA Modes Horizontal Sync
Normal operation Active
Active-off mode Inactive
Switch off -
The OSD will only function in the normal operation mode. When any button is pressed in Active-off mode, one of the following messages will be displayed:
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
3,048 m (10,000 ft) max
10,668 m (35,000 ft) max
342.21 BTU/hour (maximum)
143.31 BTU/hour (typical)
Vertical Sync Video
Active Active
Inactive Blanked
- -
®
-compliant.
Power Indicator Power Consumption
Blue 100 W (maximum) **
42 W (typical)
White Less than 0.5 W
Off Less than 0.5 W