Looking Inside - Kenmore 253.6152 Series Use & Care Manual

Looking Inside
~ CAUTION
To avoid personal injury or property damage, handle
tempered glass shelves carefully, Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
Shelf Adjustment
Refrigerator shelves are easily adjusted to suit individual
needs. Before adjusting the she~ves, remove all food.
To adjust sliding shelves:
1. Remove shelf by pulling forward to stop position.
2. Lift front edge up and pull out.
To replace shelf~ rest side edges on any pair of shelf rails
and carefully push shelf back into position.
NOTE
Cantilever shelves are supported at the back of the
refrigerator. Cantilever shelves ore available in either
g ass or wire.
To adjust cantilever shelves:
1. Lift front edge up.
2. Pull shelf out.
Replace the shelf by [nsertlng the hooks at rear of the
shelf into the wall bracket. Lower the shelf into the desired
slots and lock into position.
SpillProof
TM
glass shelves (some models) catch and hold
accidental spills. In some models, the SpilIProof
TM
shelves
sllde out for easy access to food and for fast cleaning. The
shelves slide out independently of the cantilever brackets.
Just pull the front of the shelf forward. The shelf con be
extended as far as the stopper will allow but it is not
removable from the cantilever bracket.
Sliding Glass Shelf Sliding Wire Shelf
Door storage
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items
can be quickly selected.
Some models have door racks or bfns that can
accommodate gallomsized
plastic drink containers and
economy-sized jars and
containers. Some racks are
adjustable for maximum
~
storage capacity.
The dairy compartment,
which is wormer than the
general food storage
~
section, is intended for short
term storage of cheeset
Door Rack
spreads, or butter.
Full Widtl~ Cantilever
Glass Shelf
Cantilever Glass Shelf
Fixec~ al~d Sliding
Adjustable door bins
Some mode~s have adiustable door bins that can be
moved to suit individual needs.
To move door bins
1. Lift bin straight
up.
2. Remove bin.
3. Place bin in
desired position.
4. Lower bin onto
supports until
locked in place.
14