Kenmore 253.6152 Series Use & Care Manual page 9

Door Removal / Reversal Instructions
Handle Style 1
To remove refrigerator handle:
(Handles may be easier to reverse while doors are off.)
1, Remove two screws attaching handle to top of
refrigerator door.
2. Slide handle straight up and pull handle off mounting
screw on door.
3. Remove mounting screw from door and install on
other side, moving hole plugs from corresponding
holes to apposite side.
To attach refrigerator handle:
1. Place top of handle over mounting screw, pull handle
straight down until handle is aligned with screw holes on
top of door.
2, Secure top of handle with two screws removed earlier,
8Mc~eUwntii~ r
Lock Handle
over
Mounting Screw
To remove freezer handle:
(Handles may be easier to reverse while doors are ofF,)
1. Remove two screws attaching handle to bottom of
freezer door.
2. Slide handle straight down and pull handle off mounting
3. Remove mounting screw from door and install on other
side, moving hole plugs from corresponding holes to
opposite side.
4. Self-Adhesive Nameplate Models: Use plastic putty knife
to gently peel off nameplate from door and reapply
over old holes,
To attach freezer handle:
l. Place top of handle over mounting screw, pull handle
straight up until handle is aligned with screw holes on
bottom of door.
Secure bottom of handle with two screws removed
earlier.
Mou~ting "~]
Nameplall !
Lock Handle
over
Screw----~ Mounting Screw
To reverse refrlgerator/freezer handles:
Handles may be easier to reverse while doors are ofF.
Reverse freezer and refrigerator handles as shown.
9