Remington WPG4030 Manual page 6

C
Care for your appliance to ensure a long lasting performance.
We recommend you clean your appliance after each use.
The easiest and the most hygienic way to clean the appliance is by rinsing the appliance head
after use with warm water.
Keep the switch in the "off" position when not in use.
E
,
• Brush the accumulated hair from the cutting assembly.
,
• Hold the trimmer in one hand, with the other press the foil release buttons and gently
pull the foil assembly off the trimmer.
• Blow any loose debris from the foil.
• Brush or rinse the accumulated hair from the cutter assembly.
• To replace the foil assembly, hold either side of the foil and push down until you hear a
click and it is fi rmly attached. Do not press down on the foil.
,
A
• Only use the light-grade oil or sewing machine oil on the blades.
• Do not use harsh or corrosive cleaners on the units or their cutters.
• Do not apply pressure or hard objects to cutters
• Do not disassemble cutter assembly.
• Do not submerge in water as damage will occur.
F
• Do not leave the appliance unattended while plugged in.
• Do not use the appliance if it is damaged or malfunctions.
• If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
• Do not twist or kink the cable, and don't wrap it around the appliance.
• Use and store the product at a temperature between 15°C and 35°C.
• Do not use accessories or attachments other than those we supply.
• Do not unplug the product with wet hands.
• This product is for cordless use only. Do not use your trimmer whilst plugged into the
mains.
• Always unplug from the mains when cleaning or when being used under running water
6