Download Print this page

Remington WPG4030 Manual page 3

Cordless body and bikini kit
Hide thumbs Also See for WPG4030:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Thank you for buying your new Remington® product.
Before use, please read these instructions carefully and keep them safe. Remove all
packaging before use.
A
• Use this appliance only for its intended use as described in this manual.
Do not use the appliance if it is damaged or malfunctions.
C
1 Precision Trimmer Attachment with Comfort Tips
2 Adjustable Comb Attachment
3 Arc Detail Trimmer Attachment
4 Miniscreen shaver attachment
5 On/off switch
6 Hang Hook
7 Charging indicator light
8 Cleaning brush(Not Shown)
9 Storage Pouch (Not shown)
C
Be patient when first using your body trimmer. As with any new product, it may take a little
while to familiarise yourself with the product.
Take the time to acquaint yourself with your new trimmer, as we are confident you will receive
years of enjoyable use and complete satisfaction.
F
• Always ensure that your hands, trimmer and mains adaptor are dry before charging.
Before using your trimmer for the first time charge for 24 hours Fo r subsequent
uses, charge for 14-16 hours before use. One full charge allows 30 mins of cordless usage
time.
• Ensure the product is switched off and attach the mains adaptor to the trimmer.
• Connect the mains adaptor to the mains. The charging indicator will light up.
• Charge for the time indicated above.
• Use product until the battery is low. This is indicated by the trimmer working distinctly
slower.
: This product is for cordless use only. Do not use your trimmer whilst plugged into
the mains.
• Your trimmer cannot be overcharged. However, if the product is not going to be used for
an extended period time (2-3 months), unplug it from the mains and store. Fully recharge
your trimmer when you would like to use it again.
• To preserve the life of your batteries, let them run out every six months then recharge for
14-16 hours.
3

Advertisement

loading