Client Bridge Mode - EnGenius ENH210EXT User Manual

The ENH210EXT's Access Point Mode does not provide a DHCP server so
the Wireless Client IP address must be configured manually in Local Area Network
Settings.

11.2 Client Bridge Mode

Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP
Router to join the network.
Please refer to the last section to check the Access Point's configuration.
Client Bridge
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
The Client-Bridge's IP settings must match the Access Point's settings.
Login to the web-based configuration interface with the default
IP: 192.168.1.1
Select your country or region's regulation.
Select Operation Mode to Client Bridge from System
Properties.
Use site survey to scan channels of the nearby area.
Select the AP that you would like to associate with.
Setup the authentication settings that match to the Access Point's
settings.
Select Apply to process all of the configurations.