Configuring Microsoft Windows Xp; Window Xp - EnGenius ENH210EXT User Manual

4.3 Configuring Microsoft Windows XP

Use the following procedure to configure a computer running Microsoft Windows XP with the
default Windows interface.
1. On the Windows taskbar, click Start, click Control Panel, and then click Network and
Internet Connections.
2. Click the Network Connections icon.
3. Click Local Area Connection for the Ethernet adapter connected to the ENH210EXT. The
Local Area Connection Status dialog box appears.
4. In the Local Area Connection Status dialog box, click the Properties button. The Local
Area Connection Properties dialog box appears.
5. In the Local Area Connection Properties dialog box, verify that Internet Protocol
(TCP/IP) is checked. Then select Internet Protocol (TCP/IP) and click the Properties button.
The Internet Protocol (TCP/IP) Properties dialog box appears.
6. In the properties dialog box, click Use the following IP address: to configure your
computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the
ENH210EXT, and the default gateway which is the ENH210EXT's IP address, 192.168.1.1.
Note: the subnet mask must match that of the ENH210EXT and the IP address must be on
that subnet.
7. Click the OK button to save your changes and close the dialog box.
8. Click the OK button again to save your changes.