Table of Contents
Advertisement
4.4 Configuring Apple Mac OS X
The following procedure describes how to configure TCP/IP on an Apple Macintosh running
Mac OS 10.2 or later. Note: The menu titles and placement vary in each OS X 10.x operating
system but are typically similar.
1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that the NIC connected to the ENH210EXT is selected in the Show field.
3. In the Configure field on the TCP/IP tab, select Manually.
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.
5. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the ENH210EXT, and the
Router which is the ENH210EXT's IP address, 192.168.1.1. Note: the subnet mask must
match that of the ENH210EXT and the IP address must be on that subnet.
6. Click Apply Now to apply your settings and close the TCP/IP dialog box.
Hide quick links:
Advertisement
Table of Contents
