Testing Your Configuration File - Kodak Scan Station 500 User Manual

Testing your
configuration file
3-22
Once you have created the configuration file, added any destinations
you want, selected your preferred device settings and set up an
optional password, save and test the file.
1. Insert a USB flash drive into the USB port on your PC.
2. Select File>Save. The Save Configuration To dialog box will be
displayed.
3. Select the location(s) where you want to save the configuration file.
If necessary, use the Browse button to help you locate a folder.
4. Click Save.
5. When finished, exit the Configuration Organizer and remove your
USB flash drive from the PC.
NOTE: If using Windows 2000, be sure to use "Eject hardware"
before removing the USB flash drive from your PC.
Failure to do so may result in your configuration file
not being saved correctly.
6. Test your USB flash drive by inserting it into the USB port on the
Scan Station. When the Scan Station recognizes a valid
configuration file, it will display new icons for your custom
destinations settings.
NOTES:
• You can also verify any custom scan settings by selecting the
Settings button.
• If this is the first time your USB flash drive is used on a Scan
Station, you may see the application screen flash up to three
times while the USB driver is configured for your flash drive.
A-61627 November 2008