Keyboard Setup; Info; Advanced Diagnostics - Brady BBP 33 User Manual

Tools

Advanced Diagnostics

Keyboard Setup

Info

Advanced Diagnostics
-
3 22
This procedure configures the printer to use the selected regional USB keyboard.
To configure a keyboard:
1. Access Diagnostic mode (see "Enter Diagnostic Mode" on page 3-17).
2. Press or to go to Keyboard Setup, then press
options displays.
3. Press or to select the regional configuration you want, then press
The printer is configured for use with the selected keyboard.
4. Press repeatedly to exit to the main menu.
Lists the length of label media printed, number of cuts made and the last errors
displayed.
To view printer information:
1. Access Diagnostic mode (see "Enter Diagnostic Mode" on page 3-17).
2. Press or to go to Info, then press
3. Press or to select the information you want displayed:
• Printed: Displays the number of ft (mm) of media printed to date.
• Cuts: Displays the total number of cuts made to date. (Note: The number
actually reflects the number of times the printer has retracted the material
for a new print.)
• Last Errors: Displays the last 15 printer error message numbers.
Press to display the error messages.
Note: The errors displayed are for actual messages received. So, if you get the
same error multiple times, the screen will display that error once for each
occurrence (up to 15).
4. Press repeatedly to exit to the main menu.
A password is required to enter the advanced diagnostic procedures. Contact your
Brady Technical Support contact for help with these diagnostics.
. The list of keyboard
.
®
BBP 33 Sign & Label Printer User's Manual
.