Remote Log - D-Link DSL-300T User Manual

DSL-300T ADSL Modem User's Guide
Figure 4-4. Tools – System Commands window
Save All
In order to save the configuration changes you have just made they must be saved to the Modem's non-volatile
RAM by clicking on the Save All button.
Restart
Click the Restart button to restart the Modem. If you have not saved your changes, the Modem will revert to the
previously saved configuration upon rebooting the Modem.
Restore
The DSL-300T can be reset to the default configuration for all settings using the Restore option. This will also
change the both the LAN and WAN IP address of the device, so these will need to be reconfigured accordingly.
To perform a factory reset, click the Restore button. Since the IP settings will return to their default, you will
lose access to the Web Manager. To use the Web Manager interface, the LAN IP address will need to be
reconfigured.

Remote Log

Use this menu to designate receiver stations for event messages form the Modem.
29