Advertisement
Loosely attach lateral support brace
Pre-drill floor of vehicle with 3/16"
Attach support brace to floor using
to TCB base using 5/16" flat washer
drill bit. Use holes in the support
¼" x 1" hex head lag bolts
brace as a drill template
and 5/16" nylock nut
Tighten 5/16" nylock nut
Insert inner telescoping pole
assembly and thread lock handle
into pole support base assembly.
Final Installation
Install C-3090-x laptop platform (sold separately)
3
C-TCB-28-INST-6-07
Advertisement
