Table of Contents
Advertisement
Channel
Power Save
Mode
RTS Threshold
Fragment
Threshold
To set authentication / encryption information for the access point. Please click 'Auth. \
Encry.' tab:
Here are descriptions of every setup item:
Item Name
Authentication
You can select the radio channel number for Ad-Hoc mode here.
Please select CAM (constantly awake mode, keep wireless
radio activity even when not transferring data), or PSM (Power
saving mode, switches radio off when not transferring data).
It's recommended to choose 'PSM' if you're using this network
card with notebook computer to help the battery live longer.
Check this box to set the RTS threshold by yourself. You can
drag the slider to set the threshold value, or input the value in
the box located at right.
It's recommended to keep this value untouched unless you
know the effect of changing this value.
Check this box to set the packet fragment threshold by yourself.
You can drag the slider to set the threshold value, or input the
value in the box located at right.
It's recommended to keep this value untouched unless you
know the effect of changing this value.
Description
Select the authentication type of the wireless access point or
wireless device you wish to connect. When you're adding a profile
from an existing access point or wireless device, authentication type
24
Advertisement
Table of Contents
