Updating The Unit's Firmware - Yamaha RX-A3020 Owner's Manual

Updating the unit's firmware

SOURCE SOURCE RECEIVER RECEIVER
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
AV AV
1 1 2 2 3 3 4 4
to the Internet, you can download the firmware via the network and
5 5 6 6 7 7 V-AUX V-AUX
update it.
AUDIO AUDIO
1 1 2 2 3 3 4 4
PHONO PHONO MULTI MULTI L L USB USB NET NET
Note
TUNER TUNER [ A ] [ A ] [ B ] [ B ] [ C ] [ C ]
• Do not operate the unit or disconnect the power cable or network cable during
SCENE
1 2 3 4
VOLUME
PROGRAM MUTE
TOP MENU POP-UP/MENU
• You can also update the firmware using the USB memory device from the
"ADVANCED SETUP" menu (p.135).
ON SCREEN OPTION
Cursor keys
ENTER
A firmware update is available if the following message is displayed
ENTER
after ON SCREEN is pressed.
RETURN DISPLAY
MODE
LIVE
CLASSICAL ENTERTAIN
CLUB
PRESET
MOVIE STEREO STRAIGHT
TV
PURE
INPUT
DIRECT
TV VOL TV CH
MUTE
1
2
3
The firmware update is complete.
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
Read the on-screen description.
To start the firmware update, use the cursor keys to
select "START" and press ENTER.
The on-screen display turns off.
If "UPDATE SUCCESS PLEASE POWER OFF!"
appears on the front display, press MAIN ZONE z
on the front panel.
• If you want to update the firmware later, select "CLOSE" in Step 2. "!" (exclamation
mark) appears at the upper right of the "Information" and "System" icons, and a
message will be displayed in the "System" screen (p.132). You can update the
unit's firmware by pressing ENTER in the "System" screen.
Information
icon
Message
System Icon
CONFIGURATIONS ➤ Updating the unit's firmware
144
En