Disconnecting A Bluetooth Connection; Listening To Dab Stations; Preparing For Dab Reception - Yamaha MCR-B142 Owner's Manual

Disconnecting a Bluetooth connection

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be
disconnected.
• Hold down on the remote control or SOURCE on this unit.
• Turn the system off.
• Turn off the Bluetooth setting of the other component.
When you connect an iPod touch/iPhone/iPad via Bluetooth, the Bluetooth connection may be disconnected if you switch the audio source to
iPod or USB while an iPod/iPhone/iPad is connected.
DAB (Digital Audio Broadcasting) and DAB
analog signals.
DAB + is based on the original DAB standard but uses a more efficient audio codec.
DAB and DAB + are broadcast in blocks of data called "ensembles" containing up to several radio stations that are
simultaneously broadcast.
+
DAB and DAB can also include an extensive amount of text information, enabling you to select a station by name.
Other information, such as the ensemble name or the status of the digital signal, can be displayed on the front panel display.
"DAB" described in this manual may also refer to "DAB

Preparing for DAB reception

Before tuning into DAB stations, an initial scan must be performed. When you select the DAB for the first time, the initial
scan is performed automatically.
To listen to a DAB station, connect the antenna as described in "Connecting the speakers and antenna" (P. 2).
Performing the initial scan again (Option menu)
1
2

LISTENING TO DAB STATIONS

+
use digital signals for clearer sound and more stable reception compared to
+
".
3
Press the RADIO source button to switch the
audio source to DAB.
The initial scan starts. During the scan, the degree of
progress is displayed on the front panel display.
When scan is completed, the number of receivable DAB
stations appear on the front panel display.
If the initial scan is performed, stored DAB station information
and preset DAB stations are cleared.
1 Press OPTION.
The option menu will appear.
2 Press / to select DAB INIT SCAN, and
then press ENTER.
The display will indicate "Press ENTER".
3 Press ENTER.
The initial scan starts.
LISTENING TO DAB STATIONS
13
En