Drive Chain Cleaning And Lubrication; Cable Inspection And Lubrication - KYMCO MXU 50 Owner's Manual

DRIVE CHAIN CLEANING AND
LUBRICATION
The drive chain is equipped with rubber O-
rings between the chain plates. Steam
cleaning, high-pressure washes, and certain
solvents can damage these O-rings. Use only
kerosene to clean the drive chain. Wipe it dry,
and thoroughly lubricate it with SAE 30~50
motor oil. Do not use any other lubricants on
the drive chain. They may contain solvents
that could damage the O-rings.
(1) O-rings

CABLE INSPECTION AND LUBRICATION

POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the outer
covering of control cables becomes
damaged.
Cables can also become frayed or
kinked.
Operation of controls could be
restricted, which could cause an
accident or injury.
HOW TO AVOID THE HAZARD
Lubricate the inner cables and the cable
ends. If the cables do not operate smoothly,
ask a KYMCO dealer to replace them.
Recommended lubricant:
104
WARNING
SAE 10W40 motor oil