Hasselblad CF22 CF39 User Manual page 54

11
1
1
1
1
1
1
1
1
11. Press either the or
setting.
This setting controls the amount of time that elapses
before the first exposure in the sequence.
12. Press  to select DELAY.
13. Press either or to make a DELAY setting.
This setting controls the amount of time between each
exposure in the sequence.
14. Press  to select COUNT.
to make a COUNT setting.
15. Press either or
This setting controls the number of exposures in the
sequence.
16. Press OK to confirm all the settings.
17. The CF digital back is now ready for sequence start. Note that
the MENU/EXIT button now diplays START instead:
18. Press START to set the sequence running.
19. Note that the MENU/EXIT button now displays STOP. The
sequence can be stopped at any time by pressing this button
and the standard menu display returns.

button to make an INITIAL DELAY