Specifications; Optional Accessories - Shure Microflex MX200 Series Manual

Specifications

Type
Condenser (electret bias)
Frequency Response
50–17000 Hz
Polar Pattern
MX202B/C, MX202W/C: Cardioid
MX202B/S, MX202W/S: Supercardioid
Output Impedance
EIA Rated at 150 Ω (180 Ω actual)
Output Configuration
Active balanced
Sensitivity (at 1 kHz , open circuit voltage)
Cardioid: –35 dBV/Pa (18 mV)
Supercardioid: –34 dBV/Pa (21 mV)
1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 kΩ load)
Cardioid: 124 dB
Supercardioid: 123 dB
Equivalent Output Noise (A-weighted)
Cardioid: 28 dB SPL
Supercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL
at 1 kHz)
Cardioid: 66 dB
Supercardioid: 68 dB
11.7 mm
(0.46 in.)
19.0 mm
(0.75 in.)
4
Dynamic Range (1 kΩ load at 1 kHz)
96 dB
Common Mode Rejection (10 Hz to 100 kHz)
45 dB minimum
Preamplifier Output Clipping Level (1% THD)
–6 dBV (0.5 V)
Polarity
Positive sound pressure on diaphragm produces
positive voltage on pin 2 relative to pin 3 of out-
put XLR connector.
Cable
9 m (30 ft)
Environmental Conditions
Operating Temperature: -18–57 °C (0–135 °F)
Storage Temperature: -29–74 °C (-20–165 °F)
Relative Humidity: 0–95%
Power Requirements
11–52 Vdc phantom, 2.0 mA
144.5 mm
(5.69 in.)
(.33 in.)
101.6 mm 35.4 mm
(4.00 in.) (1.39 in.)
5.8 mm
(0.23 in.)
9.1 m
(30.0 ft.)
Replacement Parts
Snap-Fit Windscreen (4 per
package)
Preamplifier Kit, Plate Mounted,
White (MX202BP and MX202WP)
Stand Adapter (MX202B and
MX202W)
In-Line Preamplifier (Black)
In-Line Preamplifier (White)
Omnidirectional Cartridge (Black)
Omnidirectional Cartridge (White)
Supercardioid Cartridge (Black)
Supercardioid Cartridge (White)
Cardioid Cartridge (Black)
Cardioid Cartridge (White)
Strain Relief (MX202BP and
MX202WP)
Clamp (MX202B and MX202WP)
Hang Clip

Optional Accessories

Desk Stand
CERTIFICATION
Eligible to bear CE Marking. Conforms to
European EMC Directive 2004/108/EC. Meets
Harmonized Standards EN55103-1:1996 and
EN55103-2:1996, for residential (E1) and light
industrial (E2) environments.
The Declaration of Conformity can be obtained
from:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: EMEAsupport@shure.de
RK183WS
(Black)
RK202PK
65B1752
RK100PK
RK100PKW
R183B
R183W
R184B
R184W
R185B
R185W
80A479
80A476
80B489
A202BB