Ford Mustang 2007 Supplement Manual page 21

Roadside Emergencies
Note: Before driving any further, adjust the tire pressure to the
recommended pressure on the vehicle's tire placard located on the
B-pillar inside the driver's door.
3. Turn the air compressor off by pressing the "O" side of the orange
button, then unscrew the hose from the tire's air valve, reinstall the tire
valve cap, unplug the electrical plug from the power point and stow the
temporary mobility kit in its original location.
What to do after the tire has been sealed
After using the temporary mobility kit to seal your tire, you will need to
replace the sealing compound and hose. Sealing compound and spare
parts can be obtained and replaced at an authorized dealer or tire dealer.
Empty sealing compound bottles may be disposed of at home; however,
liquid residue from the sealing compound should be disposed by your
authorized dealer or tire dealer, or in accordance with local waste
disposal regulations.
Note: After the sealing compound has been used, the maximum vehicle
speed is 50 mph (120 km/h) and the maximum driving distance is
120 miles (200 km). The sealed tire should be replaced immediately, or
at least within the 120 miles (200 km). After sealant use, the TPM (Tire
Pressure Monitoring) sensor located inside the wheel, must be replaced
by an authorized Ford dealer.
21
2007 05+ Mustang (197)
Supplement
USA (fus)