Table of Contents
Advertisement
Roadside Emergencies
Second stage: Checking tire pressure
1. Stop driving after approximately two miles. Then check the air
pressure of the damaged tire as follows:
• Ensure the compressor is turned off by pressing the "O" side of the
orange button.
• Remove the hose and the cable with the electrical plug from the kit's
storage compartment.
• Remove the valve cap from the sealed tire, then screw the hose firmly
onto the tire's air valve.
• Start the engine (only if the vehicle is outdoors or in a
well-ventilated area) to prevent the vehicle's battery from draining.
• Insert the electrical plug into the vehicle's power point.
• Read the air pressure gauge on the temporary mobility kit.
2. If the air pressure reads 19 psi (131 kPa) or higher, switch the air
compressor on by pressing the "I" side of the orange button and adjust
the air pressure to the recommended pressure. This pressure can be
found on a label affixed to the B-Pillar or the edge of the driver's door. If
the air pressure is higher than the label states, reduce the excess
pressure by pressing down on the pressure release valve (8).
20
2007 05+ Mustang (197)
Supplement
USA (fus)
Hide quick links:
Advertisement
Table of Contents
