Error Messages And Actions - JVC GY-HM650U Instructions Manual

Error Messages and Actions

Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as
follows according to the error status.
Memo :
This camera recorder makes use of a microcomputer. Noise interference from external sources may
0
prevent it from functioning properly. When this occurs, turn off and on the power of the camera recorder
again.
Error Message
Turn Power Off Turn
Back On Later
Fan Stop Detected
Please Turn P.Off
Fan Maintenance
Required
Getting Overheated.
Please Turn Power Off.
Rec Inhibited
Lost Media Info *
168
Status
System error.
* The warning tone sounds and the
tally lamp blinks twice every second.
The fan stopped running.
0
The power turns off automatically
0
after about 1 second.
Usage time of the fan has exceeded
9000 hours.
The battery has exceeded the
0
specified temperature.
The power turns off automatically
0
after about 15 second.
[REC] button is pressed when the
write-protect switch of the SD card is
set.
Card is removed while recording is
0
in progress.
Card is removed while formatting
0
is in progress.
Card is removed while restoring is
0
in progress.
Card is removed while adding the
0
OK mark.
Card is removed while writing a
0
setup file.
Card is removed while deleting a
0
clip.
(*: A, B)
Action
Turn off the power, and turn it on again.
If the error persists, consult your
nearest JVC dealer.
Please consult your nearest JVC
dealer.
Check the fan and replace accordingly.
For more details, please consult your
nearest JVC dealer.
Memo :
You can check the usage time of the
0
fan in [System] B [System
Information] B [Fan Hour].
(A P113 [ Fan Hour ] )
Wait until the temperature drops or
0
replace the battery.
If the error persists, consult your
0
nearest JVC dealer.
Turn off the write-protect switch of the
SD card, or insert a recordable SD card.
(A P39 [SD Card] )
Restore the card using this camera
recorder.
(A P42 [Restoring the SD Card] )