JVC GY-HM650U Instructions Manual page 130

Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in
[LCD/VF] B [Display Settings] B [TC/UB].
This item will not be displayed when "Off" is
selected.
(A P108 [ TC/UB ] )
Y Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
(A P68 [Synchronizing Time Code on Another
Camera] )
Z Live streaming mark
When [Main Menu] B [System] B [Network]
B [Settings] B [Live Streaming] B [Streaming]
is set to "On", the distribution status is
displayed.
(A P118 [ Live Streaming ] )
Icon
Distribution in progress (good
connection quality)
(Red)
.
Distribution in progress (poor
connection quality)
(Red)
.
Connection pending or
connection failed
(White)
.
a Event/Warning Display Area
Displays error messages.
(A P168 [Error Messages and Actions] )
b Media Status
---- : No card found in the selected
slot
STBY : Recording standby
: Recording
RREC
REVIEW : Clip Review
(A P72 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P : Pre Rec recording standby
(A P78 [Pre Rec] )
: Pre Rec recording
RRECP
(A P78 [Pre Rec] )
STBY C : Clip Continuous Rec recording
standby
(A P78 [Clip Continuous Rec] )
130
Status
: Clip Continuous Rec recording
RRECC
(A P78 [Clip Continuous Rec] )
STBYC : Clip Continuous Rec recording
pause
(displayed in
yellow)
(A P78 [Clip Continuous Rec] )
STBY N : Interval Rec recording standby
(A P81 [Interval Rec] )
STBYN : Interval recording pause
(displayed in
red)
: Interval Rec recording
RRECN
(A P81 [Interval Rec] )
STBY M : Frame Rec recording standby
(A P80 [Frame Rec] )
: Frame Rec recording
RRECM
(A P80 [Frame Rec] )
STBYM : Frame Rec recording pause
(displayed in
yellow)
(A P80 [Frame Rec] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
c Dual Rec/Backup Rec Display
"DUAL" is displayed in the Dual Rec mode and
"BACKUP" is displayed in the Backup Rec
mode.
(A P117 [ Slot Mode ] )
Memo :
This item is not displayed when [Slot Mode] is
0
set to "Series".
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Media
Remain] is set to "Off". However, warnings will
be displayed.
(A P108 [ Media Remain ] )
Displayed in the Display 0 and Display 1 screens
0
during warnings only. (When the remaining time
is shorter than 3 minutes)