OPERATION __________________________
Keep the strands of hair smooth to
7
avoid ridges.
6
Repeat this procedure with steps
2 to 5.
7
After using the appliance, switch
off the appliance using switch
and disconnect the power cord
from the mains.
– Power on indicator light
disappears.
Note
Allow the hair styler to cool down
7
fully before storing.
Styling waves or curls
1
Plug appliance into a suitable
mains supply.
2
Switch the hair styler on using the
On/Off switch
– The power on indicator light
illuminates.
Note
Make sure your hair is completely
7
dry.
3
Comb or brush out a section of
hair approximately 3 cm in width,
starting at the neck.
4
Place the section of hair between
the plates
, as near to the hair
A
line as you can, and then close
them.
1 6 ENGLISH
B
C
.
B
C
5
Depending on the hair style, rotate
the appliance so that the hair
wraps around it at the height of
the plates
.
A
6
Slowly pull the appliance towards
the ends of the hair.
– A curl is formed once the ap-
pliance has been pulled down
and over the ends of the hair.
7
Repeat this procedure section by
section.
8
After using the appliance, switch
off the appliance using switch
and disconnect the power cord
from the mains.
– Power on indicator light
disappears.
Note
Allow the hair styler to cool down
7
fully before storing.
Hints and tips
Hair should be completely dry to
7
achieve the best results.
Keep the strands of hair smooth
7
whilst you work, to avoid ridges
part way down the strand.
As with all hair stylers that reach
7
high salon temperatures, do not
use the appliance frequently to
avoid damage to hair.
B
C