Straightening­hair; Styling­waves­or­curls - Grundig Straight & Curls Operating Manual

OPERATION
Straightening­hair
1­­
C omb or brush out a strand of your
hair about 3 cm wide, starting at
the neck.
2 Place the strand of hair between the
A plates, as close to the hair line as
you can.
Caution
Do not touch the styling plates as they
7 7
are very hot.
3 Close the plates
immediatelly glide the straightener
down the section of hair, gently
moving from roots to tip. Avoid making
kinks in it.
Note
If you have thick hair, you might have
7 7
to repeat this process on the same
strand several times.
4­
Repeat the procedure section by
section.
5­
After using the appliance, press
a second to switch off.
– Display turns off.
B
6­ Unplug the power cord
wall socket.
­ ________________________________________
and then
A
D
from the
F
Styling­waves­or­curls
1­
Comb or brush out a strand of your
hair about 3 cm wide, starting at
the neck.
2­ Place the strand of hair between the
plates A
you can and close them.
3­
Rotate the appliance by 180° so that
the hair wraps around it at the height
of the plates
4­ While rotating, slowly pull the
appliance towards the ends of the hair.
– A curl is formed once the appliance
has been pulled down and released
from the ends of the hair.
5­
Repeat the procedure strand by strand.
6­
After using the appliance, press
a second to switch off and then pull the
power cord
F
plug out.
– Mode indicator
for
7­
Unplug the power cord
wall socket.
Caution
Leave the appliance in a safe place
7 7
to cool down.
as near to the hair line as
.
A
B disappears.
F from the
ENGLISH
for
D
19­