Scag Power Equipment Turf Tiger 52 Specifications

Specifications

Engine Options:
Fuel Capacity/Design:
Travel Control:
Ground Speed:
Main Frame Construction:
Drive Tires:
Caster Tires:
Caster Wheel Bearings:
Front Caster Arm Design:
Hydraulic Pumps:
Hydraulic Oil Cooler:
Hydraulic Oil Filter:
Hydraulic Wheel Motors:
Electrical System:
WWW.SCAG.COM
28hp CAT diesel, 3-cylinder, liquid-cooled

Kawasaki FD750D, liquid-cooled, V-Twin, horizontal shaft

Kawasaki FD791D, liquid-cooled, V-Twin, horizontal shaft, Digital Fuel Injection

27hp Kohler Command Pro, air-cooled, twin cylinder, horizontal shaft

29hp Kohler EFI, air-cooled, V-Twin, horizontal shaft, Electronic Fuel Injection

31hp Kohler Aegis, liquid-cooled, V-Twin, horizontal shaft, Electronic Fuel Injection

35hp Briggs Vanguard Big Block, air-cooled, V-Twin

8.5 gallons (11 gal. on diesels), single fuel tank mounted low in the center of the
mower to lower the center-of-gravity and improve hillside stability and traction.
Twin "Quick-Fit" steering controls with gas dampers for smooth, precise
maneuverability. Adjustable to fit various operator sizes.
Up to 12mph forward, 5 mph reverse (most models)

Up to 10.5mph forward, 5mph reverse (27CH, 29EFI & 750KA models)

Double tube, steel frame, full-length, fully-welded
52": 23 x 10.5 -12, 4 ply

61" & 72": 24 x 12 - 12, 4 ply

52": 13 x 5 - 6, 4 ply; Flat-Free

61" & 72": 13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic

Tapered roller bearings
Bolt-on for easy replacement if necessary
Dual Pumps; 16cc displacement, Hydro-Gear
Yes - 4 qt system capacity with auxiliary oil cooler
10 micron
Dual 15ci motors; 18ci motors on 28CAT & 31EFI
12 Volt battery, 350 cca. Alternator,
15-40 amp charging. Solenoid shift starter.
(Continued)
The Legend Continues.
®