Pairing; Get Paired; Pair Another Phone - Plantronics Voyager Legend User Manual

Pairing

Get Paired

Pair another phone

The first time you power on your headset, it begins the pairing process.
1 Wearing your headset, power it on. You hear "pairing" and the headset indicator lights flash red
and blue.
®
2 Activate Bluetooth on your phone and set it to search for new devices.
®
• iPhone Settings > Bluetooth > On*
™
• Android > Bluetooth: On > Scan for devices*
NOTE
*Menus may vary by device.
3 Select "PLT_Legend."
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear "pairing successful" and the headset indicator lights stop
flashing.
NOTE
To enable caller name announcement, allow access to your contacts if your phone prompts
you.
After pairing your headset to your phone you may want to pair another or new phone.
1 Switch on your headset then choose:
• Tap the Voice button and say "Pair mode," or
• Press and hold the Call button
2
While the headset LEDs are flashing red and blue, activate Bluetooth
to search for new devices.
3 Select "PLT_Legend." If your phone asks, enter four zeros (0000) for the passcode or accept the
connection.
4 Once successfully paired, LEDs stop flashing red and blue and you hear "pairing successful."
NOTE
To enable caller name announcement, allow access to your contacts if your phone prompts
you.
until you hear "Pairing"
®
on your phone and set it
6