Set The Rear View Camera; Reset The System; Replace The Fuse - Philips CED1900 User Manual

Hide thumbs Also See for CED1900:
Table of Contents

Advertisement

5
Repeat steps 3 and 4 to assign more
functions to buttons on the steering wheel.
To clear the assignment, tap [Clear All].

Set the rear view camera

If a rear view camera is connected, you can
view on the screen what the camera takes.
1
Tap
>
to access the full menu with all
feature icons displayed.
2
Tap .
» Picture from rear camera is displayed.

Reset the system

If the system hangs up, reset it.
42
EN
1
Flip up the protective cover.
2
Press RESET with the tip of a ball-point
pen or toothpick.

Replace the fuse

If there is no power, check the fuse and replace
it if it is damaged.
1
Detach the main unit from dashboard.
2
Check the electric connection.
3
Remove the damaged fuse from the rear
panel.
4
Insert a new fuse with the same
specifications (15A).
Tip
If the fuse gets damaged immediately after it is
replaced, an internal malfunction may occur. In this case,
consult your Philips retailer.

Advertisement

Table of Contents
loading

Table of Contents