Use Buttons On The Steering Wheel; Set The Rear View Camera; Reset The System; Replace The Fuse - Philips CED1800BT User Manual

Use buttons on the steering
wheel
You can assign a function to a button on the
steering wheel, and then control the system
with that button.
1
Tap > to access the full menu with all
feature icons displayed.
2
Tap .
» The [Steering Wheel Remote Control
Learning] interface is displayed.
3
Tap an icon, for example,
you want to assign the function to a button
on the steering wheel.
To cancel the assignment, tap [Cancel].
4
Press and hold the button on the steering
wheel for one second.
» The following interface is displayed.
5
Repeat steps 3 and 4 to assign more
functions to buttons on the steering wheel.
To clear the assignment, tap [Clear All].
EN
30
, of which

Set the rear view camera

If a rear view camera is connected, you can
view on the screen what the camera takes.
1
Tap > to access the full menu with all
feature icons displayed.
2
Tap .
» Picture from rear camera is displayed.

Reset the system

If the system hangs up, reset it.
1
Flip up the protective cover.
2
Press RESET with the tip of a ball-point
pen or toothpick.

Replace the fuse

If there is no power, check the fuse and replace
it if it is damaged.
1
Detach the main unit from dashboard.
2
Check the electric connection.
3
Remove the damaged fuse from the rear
panel.
4
Insert a new fuse with the same