Table of Contents
Advertisement
Entering a Known
Tare Weight
Removing an Active
Tare Weight
Bulk Sampling Operations
Sampling Overview
9
4. Place the material to be weighed in the
container. . .
Net weight is displayed.
5. To remove the tare weight from memory,
empty the scale platform and press the
T T T T T ARE
ARE
ARE
ARE
ARE key. . .
Scale returns to gross weighing mode.
To enter a known tare weight, follow these steps:
1. Key in the known tare weight on the
numeric keypad. . .
When you press a numeric key, the
softkey selections change. One of the
softkeys is T T T T T ARE
2. Press the T T T T T ARE
The keyed in value becomes the active
tare weight and the display changes to
net weighing mode.
To remove an active tare weight, empty the
scale platform and press the T T T T T ARE
in 0 0 0 0 0 on the numeric keypad and press the
T T T T T ARE
ARE
ARE
ARE
ARE softkey. The display returns to gross
weighing mode.
To perform a bulk sampling operation the first
step is to obtain the average weight of each
piece or the piece weight, abbreviated as pcwt.
You can key in a known piece weight or obtain a
piece weight by sampling.
Sampling consists of placing a known number
of pieces on the scale and letting the scale
determine the individual piece weight. The
ARE
ARE.
ARE
ARE
ARE
ARE softkey. . .
ARE
ARE
ARE
ARE key or key
ARE
ARE
Advertisement
Table of Contents
