Single Piece Weighing; Gross Weighing; Net Weighing - NCI 7050 User Manual

Single Piece Weighing

Gross Weighing

Net Weighing

Place a single piece on the weight platter.
Using the "UNITS" soft key, you can toggle
between 0.001 lb. and 0.01 oz. The weight of
the single piece will be displayed in Areas B
and C.
Follow these steps to perform a gross weighing
operation.
1. With the scale powered up, zero the scale
if the display does not already show zero by
pressing the ZERO
Display shows 0 0 0 0 0 weight.
2. Place the item to be weighed on the scale
platform. . .
Gross weight is displayed.
3. Remove the item and repeat all steps for
the next item.
Follow these steps for performing a net weighing
operation:
1. With the scale powered up, zero the scale
if the display does not already show zero by
pressing the ZERO
Display shows 0 0 0 0 0 weight.
2. Place the container to be tared on the scale
platform. . .
Gross weight is displayed.
3. Press the T T T T T ARE
The weight is tared, 0 0 0 0 0 weight is
displayed and the tare and net
annunciators appear on the display.
ZERO ZERO
ZERO key. . . ZERO
ZERO ZERO
ZERO key. . . ZERO
ARE ARE key. . . ARE
ARE
8