Self-Timer Photography - Canon EOS 600 Instruction

SELF-TIMER PHOTOGRAPHY
4) Focus your subject, compose the picture and
then press completely the shutter button. The
self-timer operation indicator will start blink-
ing.
• The. shutter automatically releases ten sec-
onds after being pressed. Two seconds before
shutter release, the indicator starts blinking
faster.
• To cancel the self-timer before shutter release,
press the battery.check button.
• Do not stand in front of the camera when you
press the shutter button.
In self-timer photography, use the finder
cover to prevent stray light from entering.
1) Slide the eyecup up to remove.
2) Attach Jhe viewfinder cover.
3) Turn the electronic
input'dial until ".~ "
mark appears in
the display panel.
1) Set the main switch
to either "A" or
"C(·»)" .
The self-timer allows you to delay shutter release
for ten seconds and get into the picture.
Put the camera on a table, tripod, or other flat
surface.
2) Open the switch cover and press the film wind-
ing mode selector.
24
25