Table of Contents
Advertisement
EXPOSl:JRE COMPENSATION
AUTO EXPOSURE BRACKETING
2) While pressing the exposure compensation
button, turn the electronic input dial to the
desired exposure compensation Value.
2) Turn the electronic input dial to the desired
bracketing value.
•
If you set 1.5 in the display panel, for example,
the camera automatically makes three contin-
uous exposures in sequence of -1.5 step of
underexposure, correct exposure according
to the cam'era's meter and
+
1.5 step of over- .
exposure.
3) Three continuous exposures are automati-
cally made regardless of the film winding
mode.
•
Auto bracketing will remain set until cleared.
To clear auto exposure bracketing, display the
"AEB" and preset bracket value again by fol-
lowing step 1), then turn the electronic input
dial until the bracket value returns to 0.0.
Use auto exposure bracketing when you want to
vary' the best exposure of the same scene by
changing the amount of exposure on film in-
tentionally. The range of bracketing "'is up to
±
5 steps in 1/2-step increments. (This mode can-
not be used in flash photography.)
1)
Open the switch cover and press both the AF
mode selector and battery check button simul-
taneously to display the 0.0 and "AEB" in-
dicating auto exposure bracketing.
- 2.0 steps of
compensation applied
+
1.5 steps of
compensation applied
f.-'
m
o
-c.ur-.:;O
o
+
:.5i!O
3) Remove your finger from the exposure com-
pensation button.
•
The"
+ /-"
mark indicating exposure compen-
sation status appears in the viewfinder and
in
the display panel.
•
Reset the amount of compensation to "0.0
+ /-"
otherwise, subsequent frames will be
incorrectly exposed.
1)
Press the exposure compensation button and
"0.0
+ /-"
appears in the display panel.
Use exposure compensation for high-key (inten-
tionally overexposed) or low-key (intentionally
underexposed) shots. The range of exposure
compensation is up to
±
5 steps in 1/2-step
increments.
•
"+"
means increasing exposure while "-"
means decreasing exposure.
•
Exposure compensation can be used regard-
less of the metering or shooting mode, except
when the main switch is set to the"
0".
40
41
Hide quick links:
Advertisement
Table of Contents
