Checking The Battery - Canon EOS 600 Instruction

Power eye autofocus slr
Hide thumbs Also See for EOS 600:
Table of Contents

Advertisement

lOADING. liHE BATTERY
CHECKING TME BATTERY
This camera uses one, six-volt lithium battery pack 2CR5.
~~
~ ~
!
!
Battery power
sufficient
Have a new
battery handy
Replace with new battery
(no battery
check mark)
(blinking)
Q) Open the switch cover and
press the battery check button
(~). Battery power shows in
the display panel.
(example)
p
1) Set the mai n switch to the
green "0", "A" or "(e))" mark.
The display will come on at
this time. If the display does
not appear, confirm that the
battery is loaded correctly.
2) As shown in the photo, load
the battery so that its termi-
nals face in the direction of
the camera. Make sure the
battery is pushed in all the
way until it is locked by the
orange lever.
3) Replace the grip securely.
When replacing the battery,
first push the orange lever up.
When using a tripod, dis-
mou nt the camera before re-
placing the battery.
1) Remove the grip with a coin or
similar object.
6
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents