Edit Sip Profiles - Nokia E75 User Manual

Wireless LAN plugins
Select Menu Control panel
>
Connection > Destinations, and an access point group.
The extensible authentication protocol (EAP) plug-ins are
used in wireless networks to authenticate wireless devices
and authentication servers, and the different EAP plug-ins
make possible the use of various EAP methods (network
service).
You can view the EAP plug-ins currently installed in your
device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select
access point and define an access point that uses WLAN
as a data bearer.
2. Select 802.1x or WPA/WPA2
3. Select WLAN security settings
EAP plug-in settings.
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN using the
access point, select the desired plug-in and
Enable. The EAP plug-ins enabled for use with this access
point have a check mark next to them. To not use a plug-in,
select Options > Disable.
To edit the EAP plug-in settings, select
To change the priority of the EAP plug-in settings, select
Options Raise priority
>
before other plug-ins when connecting to the network with
© 2009 Nokia. All rights reserved.
Settings and
>
Options
as the security mode.
WPA/WPA2
>
Options
Options > Edit.
to attempt to use the plug-in
the access point,
plug-in for network authentication after attempting to use
other plug-ins.
See the device help for more information on EAP plugins.
Session initiation protocol (SIP)
settings
Select Menu
Connection
The session initiation protocol (SIP) is used for creating,
modifying, and terminating certain types of communication
sessions with one or more participants (network service).
New
>
Typical communication sessions are video sharing and net
calls. SIP profiles include settings for these sessions. The SIP
profile used by default for a communication session is
underlined.
EAP
> >
To create a SIP profile, select
Use default profile
To select the SIP profile you want to use by default for
communication sessions, select
>

Edit SIP profiles

Select Menu
Connection
Select Options
Profile name
•
Service profile
•
orOptions Lower priority
>
Control panel Settings
> >
SIP settings.
>
Options
or Use existing profile.
Options
Control panel Settings
> >
SIP settings.
>
Edit and from the following:
>
— Enter a name for the SIP profile.
— Select IETF or Nokia
to use this
and
New SIP profile
> >
Default profile.
>
and
3GPP.
149