Connection Settings; Network Settings - Nokia E75 User Manual

for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you are not able to make calls. When line 2 is
selected, is displayed in the home screen.
Line change — Prevent line selection (network service),
•
if supported by your SIM card. To change this setting, you
need the PIN2 code.

Network settings

Select Menu Control panel
>
Network.
To select the network mode, select
mode, UMTS, or GSM. In dual mode, the device switches
automatically between networks.
Tip: Selecting UMTS
may increase the demand on battery power and reduce
the battery life. In regions close to both GSM and UMTS
networks, selecting
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select
Manual to select from available networks, or
set the device to select the network automatically.
To set the device to indicate when it is used in a microcellular
network (MCN), select Cell info display
© 2009 Nokia. All rights reserved.
Settings and Phone
>
Network mode
enables faster data transfer, but
Dual mode may cause constant
Operator selection and
Automatic
> On.

Connection settings

Select Menu
Connection.
Select from the following:
Bluetooth
•
USB — Edit the data cable settings.
•
Destinations
•
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit or remove them.
>
VPN — Manage the settings for virtual private
•
networking.
and Dual
Packet data
•
attached, and enter the default packet switched access
point name if you use your device as a modem for a
computer.
Wireless LAN
•
when a wireless LAN (WLAN) is available, and define how
often the device searches for networks.
Video sharing
•
profile for video sharing, and define the video saving
settings.
SIP settings
•
to
(SIP) profiles.
XDM profile
•
required for many communications applications, for
example, presence.
Presence
•
service). To register for the service, contact your service
provider.
Control panel Settings
> >
— Edit the Bluetooth settings.
— Set up new or edit existing access points.
— Define when packet data network is
— Set the device to display an indicator
— Enable video sharing, select the SIP
— View or create session initiation protocol
— Create an XDM profile. The XDM profile is
— Edit the settings for presence (network
and
143