Brother DCP-365CN Quick Setup Manual page 31

Wireless Network
Install the drivers & software (Mac OS X 10.3.9 - 10.4.x - 10.5.x)
13
Before you install
MFL-Pro Suite
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
IMPORTANT
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/.
• For Mac OS X 10.3.0 to 10.3.8 users, upgrade
to Mac OS X 10.3.9 - 10.5.x.
• Make sure there are no memory cards or a
USB Flash memory drive inserted into the
machine.
14
Install MFL-Pro Suite
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon to install.
c
Choose Wireless Network Connection, and
then click Next.
d
Click on the Wireless settings checked and
confirmed check box, and then click Next.
Follow the on-screen instructions.
e
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
f
The Brother software will search for the Brother
device.
g
If the machine is configured for your network,
choose the machine from the list, and then click
OK.
Macintosh
31