Something Not Working - Zanussi ZD25/6AT User Manual

Something not working

Some functioning problems may be due to causes which can easily be solved before calling the Network
Service. Follow theses instructions:
Problem
A) INTERNAL LIGHT
1. Inner light (Refrigerator
compartment) does not
come on «H».
B) PERFORMANCE
1. The freezer or the refrigerator
do not cool.
2. The freezer or the refrigerator
do not cool enough.
3. Food gets frozen in the
refrigerator.
4. The motor does not stop
running:
Cause
• Appliance unplugged.
• No power at mains socket.
instalación doméstica.
• Bulb loose or burnt out.
• The temperature regulator is on
"0" position
• The appropiate «Temperature
Regulator» is in position «0».
• Door not properly closed.
• The door has been opened
frecuently.
• Inadequate position of
«Temperature Regulator».
• Food has been introduced
recently in large quantities.
• «Temperature Regulator»
on inadequate position.
• Food touches the back walls
• Temperature regulator
on inadequate position.
• Door not properly closed.
• Door opened frequently.
• Food has been put in
recently in large quantity.
Solution
• Plug the appliance into mains.
• Chek the domestic
automatic cutout.
• Tighteen or substitute it fo
another of same rating.
• Change the regulator to another
position
• Change to another position.
• Close well.
• Avoid frecuent opening.
• Change position to a cooler one.
• The appliance will get back
to normal, wait.
• Change position to less cold.
• Bring food forwards.
• Change position to less cold.
• Close the door correctly.
• Avoid frequent opening.
• Wait for the appliance to come
back to normal.
17