Download  Print this page

Something Not Working - Zanussi FA1023 User Manual

Washing machine fa 1023
Hide thumbs


Something not working?

Problems which you can resolve yourself.
• The machine does not start up:
• The machine does not fill:
• The machine fills then empties
• The machine does not empty
and/or does not spin:
• There is water on the floor:
• Unsatisfactory washing results:
• The machine vibrates or is
• The door will not open:
Possible cause
• The door is not firmly closed.
• The machine is not plugged in or there is no power
at the socket.
• The main fuse has blown.
• The programme selector is not positioned correctly or
the programme selector knob has not been pulled out.
• The water tap is closed.
• The inlet hose is squashed or kinked.
• The filter in the inlet hose is blocked.
• The door is not properly closed.
• The end of the drain hose is too low. Refer to
relevant paragraph in "water drainage" section.
• The drain hose is squashed or kinked.
• The option
• The laundry is not evenly distributed in the drum.
• The drainage area is blocked. Clean it.
• Too much detergent or unsuitable detergent
(creates too much foam) has been used.
• Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
• The drain hose is damaged.
• Check that the diaphragm lid is correctly screwed
into place.
• Too little detergent or unsuitable detergent has
been used.
• Stubborn stains have not been treated prior to
• The correct temperature was not selected.
• Excessive laundry load.
• The transit bolts and packing have not been
• The support feet have not been adjusted.
• The laundry is not evenly distributed in the drum.
• Maybe there is very little laundry in the drum.
• The programme is still running.
• The door lock has not been released.
• There is water in the drum.
has been selected.

Hide quick links:



  Related Manuals for Zanussi FA1023

This manual is also suitable for:

Fa1032Fa 1023