Table of Contents
Advertisement
6. Insert all the ENDCAPS (15) on the SEAT RAIL.
7. Slide the SEAT RAIL onto the SEAT RAIL CONNECTOR.
8. Push the SEAT towards the far end of
the SEAT RAIL. Lift the SEAT RAIL into
an upright position and slide the SEAT back
down the rail to rest on the MAIN UNIT
(see illustration at right). This will allow you
to attach the SEAT RAIL to the
CONNECTOR with 4 SCREWS (6),
4 LOCKING WASHERS (7) and 4 FLAT
WASHERS (8).
9. Mount the 2 remaining RUBBER
STOPPERS to the SEAT RAIL at the
front of the rail using 2 SCREWS (10)
and 2 FLAT WASHERS (8).
8
Advertisement
Table of Contents
