Brookstone BodyForm User Manual page 8

3. Attach the SEAT to the SEAT SUPPORT with 3 SCREWS (19). Use the included
ALLEN WRENCH to finish tightening them and make sure they are secure.
4. Attach 2 RUBBER STOPPERS (9) on the end of the SEAT RAIL with the REAR
FOOT SUPPORT with 2 SCREWS (10) and 2 FLAT WASHERS (8). Tighten with
the ALLEN WRENCH.
5. Slide the SEAT onto the SEAT RAIL, ensuring that the SEAT is facing in the
correct direction.
17
18
19
7