Installing The Batteries; Antenna Installation - Brookstone u-Control User Manual

InsTallIng THe baTTeRIes

1. Turn the remote control over to access the BATTERY COMPARTMENT
on the back.
2. Unscrew the one screw and push the LATCH LOCK in towards the
BATTERY COMPARTMENT COVER and remove (see below).
Compartment
Latch Lock
3. Insert 6 AAA batteries according to the polarity indicators inside the compartment.
4. Replace the BATTERY COMPARTMENT COVER by sliding the two tabs
on the cover into the slots in the housing and snapping the LATCH LOCK
securely into place, then replace the screw.

anTenna InsTallaTIon

Install the included ANTENNA into the top of the wireless controller (see above).
When installing the ANTENNA, turn or "screw" the antenna clockwise until it stops
moving. Never force the ANTENNA once it stops turning.
Hint: Remember to extend the antenna for maximum performance and control.
Battery
Slots (2)
Antenna
Screw Hole
8