Cleaning The Unit - Brookstone CandyMan Instructions Manual

CleanInG The UnIT

It is recommended to clean the lid, reservoir dome, funnel, auger cover, auger and
auger base before the first use . The unit must be disassembled before cleaning .
Remove the batteries and unplug the adapter before cleaning any parts .
dISASSeMBLe
1 . Make sure the SETTINgS KNOB is turned to
candy/nuts in the reservoir .
2 . Unscrew and remove the THUMBSCREW on the rear of the unit .
3 . Remove the RESERVOIR DOME, LID, FUNNEL, AUgER COVER and AUgER .
Unscrew the 2 AUgER BASE SCREWS (Phillips #2 screwdriver required) and
remove the AUgER BASE .
Note: do not operate CandyMan
IMPORtANt: dO NOt clean any parts in the dishwasher.
Hand wash parts with mild dish detergent . Make sure all parts are dry before
reassembling .
Parts you may hand wash with mild detergent:
• Lid
• Reservoir dome
• Funnel
• Auger cover
• Auger
• Auger base
7
when it is disassembled.
tM
and that there are no