Power Source - Brookstone CandyMan Instructions Manual

6 . Replace RESERVOIR DOME by lining up the thumbscrew tab first and then
snapping in the front to the main body (see illustration below) .
7 . Screw in the THUMBSCREW to secure the FUNNEL and the RESERVOIR
DOME to the MAIN BODY . Do not overtighten .
8 . Replace the LID, making sure the lid alignment graphic lines up with the finger
groove on the RESERVOIR DOME .

PoWeR soURCe

INStALLINg tHe BAtteRIeS
1 . Lift the BATTERY COVER to open .
2 . Insert 4 AA batteries according to the polarity indicators inside
the compartment .
3 . Replace the BATTERY COVER .
IMPORtANt: Always replace batteries with NeW batteries of the same size
and type. It is also recommended to use non-rechargeable alkaline batteries.
9
Step 1 Step 2