Filling And Using Candyman - Brookstone CandyMan Instructions Manual

Motion-activated candy dispenser
Table of Contents

Advertisement

fIllInG CanDYMan
1 .
Remove the LID .
2 . Pour candy or nuts into the RESERVOIR DOME .
3 . Replace the lid, making sure the lid alignment
graphic lines up with the finger groove on
the RESERVOIR DOME (see at right) .
4 . Place on a flat, level surface .
UsInG CanDYMan
1 . Turn the knob to the desired setting:
Small handful
• Small-sized candy or nuts: approximately 15-20 pieces
• Large-sized candy or nuts: approximately 6-8 pieces
Large handful
• Small-sized candy or nuts: approximately 30-35 pieces
• Large-sized candy or nuts: approximately 10-12 pieces
Bowl
:
• Small-sized candy or nuts: approximately 80-90 pieces
• Large-sized candy or nuts: approximately 25-35 pieces
2 . Place your hand or bowl under the chute to activate the sensor and candy/nuts
will be dispensed .
3 . Wait until all candy/nuts are dispensed before removing your hand or bowl .
11
TM
TM
:
:
Finger groove

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents